ZIROCCO-M100E
M100E Advantages
- Powerful and fast drying with speeds up to 1.9 MPH
- Drying width up to 47″
- Useful for line marking, crack sealing, bridge deck membrane and preformed thermoplastic application • Versatile and various nozzle widths and types
- Line driver hatch for use of line drivers
Features
The electrical nozzle adjustment system creates the ability for optimal nozzle height on uneven or softer surfaces and helps clear obstacles moving the nozzle to a safe height.
The electrical propulsion system makes it easy to either walk behind the dryer or utilize the optional ride-on trolley for a comfortable work position for the operator.
Various nozzle types (20, 30, 35, 50, 60, 80, and 100 cm) and sizes are easily replaceable and offer optimal performance on specific drying, cleaning, and heating tasks.
Work and hazard lights improve safety and outlook for the operator.
The Zirocco Telematics system enables remote diagnostics, utilization reports, and tracking.
The turbine service intervals are 100 hours for optimal performance and turbine lifetime. The turbine module can be replaced in a few minutes.
Specifications & Data
| Drying speed | Up to 3 km/h (1.86 mph) |
| Drying widths | 20-100 cm (8-39”) - delivered with 20 cm / 8” Hover Nozzle |
| Dimensions & weight | H: 55” W: 18” - 253 lbs excl. fuel |
| Replaceable nozzle | The various nozzles can be installed and replaced in a few minutes |
| Nozzle variations & purpose | Line marking, joint sealing, bridge deck and pavement drying |
| Display, Telematics & GPS system | 4.3” 4-button display with Zirocco Telematics and 4G antenna |
| Fuel consumption (average) | 5.8 gal/hour 80-100 min. operation on a full fuel tank |
| Fuel tank capacity | 8.2 Gallons |
| Air filter setup | 2 pcs air filters (5-10 operation hours each) + 1 easily replaceable pre-filter (app. 2-5 operation hours each) |
| Nozzle temperature range | App. 662-1076°F |
| Fuel specifications | Standard Diesel EN590 or Exxsol D80 Petroleum/Kerosene + 3-5% Zirocco Turbine Oil |
| Battery & charging | Standard 12V car battery (app. 3-5 hours operation on a full charge) |
| Ride-on capability | A trolley is available as ride-on-attachment |
| Line driver compatible | Yes, towbar is included |
| Start-up time | Approx. 40 seconds |
| Max noise level at 100% | 108 dB LWA |
| Operating temperature | 23°F to 104°F |
| Turbine module service interval | 100 hours (recommended yearly) of the 35 lbs turbine module |