Choose from Two Jet Dryer Models
Extend the season of work, get better adhesion and dry much faster and easier with our jet dryers prior to your line marking work at car parks, roads, runways and aprons, go-kart tracks, railway platforms, etc.
Choose either the Hammer Jet, the world’s most ergonomic, lightweight, and versatile jet dryer, or the more comfortable M150E Easy Dryer with an electrical nozzle elevation and propulsion system.
COMFORTABLE & POWERFUL JET DRYER – DRY UP TO 3 KM/H. The ultimate dryer and cleaner for companies conducting paving, line marking, tape removal, waterproofing, and crack repair.
- Line marking – Drying and cleaning prior to marking jobs at car parks, roads, sports tracks, runways, and aprons.
- Crack repair and joint sealing – Drying and cleaning prior to sealing.
- Tape application and removal – Heating the surface and the tape adhesive for better quality and easier removal.
- Bridgedeck waterproofing – Drying of the surface prior to waterproofing.
- Paving – Drying of larger surfaces prior to the application of paving.
ZIROCCO-M150E
COMFORTABLE & POWERFUL JET DRYER – DRY UP TO 3 KM/H. The ultimate dryer and cleaner for companies conducting paving, line marking, tape removal, waterproofing, and crack repair.
- Line marking – Drying and cleaning prior to marking jobs at car parks, roads, sports tracks, runways, and aprons.
- Crack repair and joint sealing – Drying and cleaning prior to sealing.
- Tape application and removal – Heating the surface and the tape adhesive for better quality and easier removal.
- Bridgedeck waterproofing – Drying of the surface prior to waterproofing.
- Paving – Drying of larger surfaces prior to the application of paving.
Features
The electrical nozzle adjustment system creates the ability for optimal nozzle height on uneven or softer surfaces and helps clear obstacles moving the nozzle to a safe height.
The electrical propulsion system makes it easy to either walk behind the dryer or utilize the optional ride-on trolley for a comfortable work position for the operator.
Various nozzle types (20, 30, 35, 50, 60, 80, and 100 cm) and sizes are easily replaceable and offer optimal performance on specific drying, cleaning, and heating tasks.
Work and hazard lights improve safety and outlook for the operator.
The Zirocco Telematics system enables remote diagnostics, utilization reports, and tracking.
The turbine service intervals are 100 hours for optimal performance and turbine lifetime. The turbine module can be replaced in a few minutes.
Specifications & Data
| Drying speed | Up to 3 km/h (1.86 mph) |
| Drying widths | 20-100 cm (8-39”) - delivered with 20 cm / 8” Hover Nozzle |
| Dimensions & weight | L: 151 cm / 59” H: 123 cm / 48” W: 65 cm / 25.5” - 105 kg / 231 lbs excl. fuel |
| Replaceable nozzle | The nozzles can be installed and replaced in two minutes |
| Nozzle variations & purpose | Line marking, joint sealing and waterproofing |
| Display, Telematics & GPS system | 4.3” 4-Button display with Zirocco Telematics and 4G antenna |
| Fuel consumption (average) | 25 L/hour (6.6 gal/hour) app. 60 min. operation on a fuel tank |
| Fuel tank capacity | 27L (7.1 gal) |
| Air filter setup | 1 cylinder filter (app. 25 hours run time) + 1 easily replaceable pre-filter (app. 2.5 hours run time) |
| Nozzle temperature range | App. 500-620°C (932-1148°F) |
| Fuel specifications | Standard Diesel EN590 or Exxsol D80 Petroleum/Kerosene + 3-5% Zirocco Turbine Oil |
| Battery & charging | Makita 40V, 8 Ah (app. 1 hour run time) & Makita 40V charger |
| Ride-on capability | A trolley is available as ride-on-attachment |
| Start-up time | Approx. 40 seconds |
| Max noise level at 100% | 108 dB LWA |
| Operating temperature | -10°C to +40°C (23°F to 104°F) |
| Turbine module service interval | 100 hours (recommended yearly) of the 7 kg / 15.4 lbs module |
| Work light capability | Work and hazard lights installed |
| Electrical features | The nozzle is elevated and the machine is propelled by an electrical motor |
| Display features | Power level, fuel level, nozzle temperature, current run time, turbine operation hours, battery voltage, time to next service and turbine states |
Hammer Jet
The lightweight and ergonomic design of the Hover Nozzle offers improved drying performance and a comfortable work position due to the hover effect of the nozzle.
- Line marking – Drying and cleaning prior to marking jobs at car parks, roads, runways, and aprons.
- Crack repair and joint sealing – Drying and cleaning prior to sealing.
- Tape application and removal – Heating of the surface and the tape adhesive for better quality and easier removal.
- Rooftop waterproofing – Drying of the rooftop surface prior to waterproofing.
- Roofing felt heating – Heating of the felt and surfaces with non-flammable hot air.
- Railroad switch de-icing – Quick heating and cleaning of the switches with non-flammable hot air.
- Application of preformed thermoplastics – Avoid scorches on the thermoplastics and work without LPG.
Features
The 23 kg Hammer Jet is the world’s most portable jet dryer. It enables drying at speeds up to 2.5 km/h and is always easy to have on-site for many tasks within different industries.
With embedded Telematics, a new rugged 4.3” display, an effective and simple filter concept, and the use of an external Makita battery, this machine is the ultimate drying tool for industries requiring outdoor surface drying.
The various nozzle types (20, 30, 35, and 50 cm) and sizes are easily replaceable and offer optimal performance on specific drying, cleaning, and heating tasks.
The average fuel consumption is only app. 12 Litres per hour (15-25 minutes of operation on a fuel tank).
The turbine service intervals are 100 hours (yearly service recommended) for optimal performance and the expected turbine lifetime of app. 1000 hours. The turbine can be replaced in few minutes.
Specifications & Data
| Drying speed | Up to 2.5 km/h (1.5 mph) |
| Drying widths | 20-50 cm (8-20”) - delivered with 20 cm / 8” Hover Nozzle |
| Dimensions & weight | H: 152 cm/60" W: 37 cm/14.5" - 23 kg / 50.7 lbs excl. fuel |
| Replaceable nozzle | The nozzles can be installed and replaced in two minutes |
| Nozzle variations & purpose | Line marking, preformed thermoplastics, joint sealing, waterproofing and roof felt drying |
| Display, Telematics & GPS system | 4.3” 4-Button display with Zirocco Telematics and 4G antenna |
| Fuel consumption (average) | 12 L/hour (3.2 gal/hour) 15-25 min. operation on a fuel tank |
| Fuel tank capacity | 3.8 L (1 gal) |
| Air filter setup | 1 cylinder filter (app. 25 hours run time) + 1 easily replaceable pre-filter (app. 2.5 hours run time) |
| Nozzle temperature range | App. 500-620°C (932-1148°F) |
| Fuel specifications | Standard Diesel EN590 or Exxsol D80 Petroleum/Kerosene + 3-5% Zirocco Turbine Oil |
| Battery & charging | Makita 12V, 4Ah (app. 1.5 hour run time) & Makita 10.8-12V charger |
| Start-up time | Approx. 40 seconds |
| Max noise level at 100% | 108 dB LWA |
| Operating temperature | -10°C to +40°C (23°F to 104°F) |
| Turbine module service interval | 100 hours (recommended yearly) of the 4.3 kg / 9.5 lbs module |
| Display features | Power level, nozzle temperature, current run time, turbine operation hours, battery voltage, time to next service and turbine states |